XLR 3 Pin to Blunt Installation Cable with Neutrik XLR Connectors (Mal - Custom Cable Connection
4.5
(351) ·
€ 64.50 ·
En stock
Custom Cable Connection microphone cables are a great choice for custom "pro" audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires wit
Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:
High performance Balanced Microphone Cable 24 AWG with 95% spiral shield. PVC Black Jacket
Shield: Bare annealed copper
Capacitance: 21 pF/ft. @ 1 kHz
Characteristic Impedance: 70 Ohm NOMINAL
D.C. Resistance @ 20°C: 23 Ohm/1000'
Gold Plated 1/4in Male Stereo Rean NYS228BG Connectors
Assembled in Dallas, TX by Custom Cable Connection
Pinout Tip : Red
Ring : Blue
Shield : Shield
Don't see the length you are looking for, we will build it for you!
For a custom length quote, call: 866.770.3207 or email: sales@ Our 3.5mm Stereo Male (TRS) to 1/4 inch Stereo Male (TRS) Cable is designed to interconnect audio devices with stereo and mini stereo phone jacks. It is ideal for use in a variety of professional and consumer applications.
Typical Applications:
Audio connections between multimedia devices.
Connect your iPod, laptop, or similar device to a mixing console, home theater devices, and amplifiers.
Works with any devices standard 3.5mm aux Jack, such as iPad, iPhone, iPods, MP3 players, Laptops, PCs, Cell Phones, Tablets, Home theater, speakers etc
Features:
2 Conductor, 24 AWG, stranded bare copper, polypropylene insulated, aluminum/polyester tape shield, PVC jacketed installation microphone wire
3.5mm Male Stereo Solder Plug, Nickel plated with strain relief
1/4 Plug with 3 Conductor Nickel Shell Solder Contacts
Don't see the length you are looking for, we will build it for you!
For a custom length quote, call: 866.770.3207 or email: sales@ Custom Cable Connection balanced Neutrik microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires with a shield covering them. The twisted pair would carry the actual audio signal while the overall shield acts as a noise absorbing barrier. The shield is typically connected to ground.
The outer jacket is constructed from a durable, ultra-flexible matte black PVC compound. O.D.: .21024-gauge bare copper conductorsConnectors: XLR Male Plug to XLR Female JackRugged Nickel Plated XLR Connectors with Strain Relief Neutrik NC3MXX and NC3FXX Connectors Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:
High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.
PVC Black Jacket
Shield: Bare annealed copper
Capacitance: 21 pF/ft. @ 1 kHz
Characteristic Impedance: 70 Ohm NOMINAL
D.C. Resistance @ 20°C: 23 Ohm/1000'
Neutrik Connectors: NP3RX and NYS228
Assembled in Dallas, TX by Custom Cable Connection
Don't see the length you are looking for, we will build it for you!
For a custom length quote, call: 866.770.3207 or email: sales@ Custom Cable Connection microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires with a shield covering them. The twisted pair would carry the actual audio signal while the overall shield acts as a noise absorbing barrier. The shield is connected to ground.
The outer jacket is constructed from a durable, ultra-flexible matte black PVC compound. O.D.: .210
24-gauge bare copper conductors
Connectors: XLR 3 Pin to 3 Bare Wires
Connector Options: Male (31096) or Female (31095)
Rugged Nickel Plated XLR Connectors with Strain ReliefPinoutPin 1- Shield
Pin 2- Red
Pin 3- Blue4 Pole Speaker Box Female D Series Heavy Duty Chassis Panel Mount Conn – RiteAV
XLR 3 Pin to Blunt Installation Cable with Neutrik XLR Connectors (Mal - Custom Cable Connection
100 Foot Custom Cable Connection Pro-Audio XLR Balanced Microphone Cable with Neutrik NC3MXX Male and Neutrik NC3FXX Female XLR Connectors : Musical Instruments
Neutrik's XLR cable connectors
Custom Cable Connection 1 Foot Pro-Audio XLR Balanced Microphone Male to Blunt Economy 18 AWG Cable : Musical Instruments
1 Port XLR 3 Pole Male /1 Port XLR 3 Pole Female D Series Heavy Duty S – RiteAV
Custom Cable Connection microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or
XLR 3 Pin to Blunt Installation Cable with Neutrik XLR Connectors (Male or Female Options)
Neutrik's XLR cable connectors
Neutrik's XLR cable connectors
Neutrik NA3FDM XLR D Series 3-Pin Female to Male Adapter : Musical Instruments
1 Foot Custom Cable Connection Pro-Audio Balanced Microphone with Neutrik NC3MXX XLR Male Connector to Blunt end Cable : Musical Instruments
Neutrik's XLR cable connectors
Neutrik's XLR cable connectors
AV Wiring – RCI Custom
Craftpak™ Assemblies